Mobile Sand Blasting in Dublin

Mobile Sand Blasting Services in Dublin

Years of paint, rust, grime, and old coatings don’t just look bad — they stop new finishes bonding and let corrosion spread underneath. Getting a surface properly clean by hand is slow, patchy, and often impossible. Mobile sand blasting in Dublin strips it all back to a sound, bare surface in a fraction of the time, bringing the equipment directly to your site so nothing has to be dismantled or transported. It’s why contractors, manufacturers, and property owners across the city rely on on-site blast cleaning to prepare and restore surfaces fast.

Irish Floor Company provides mobile sand blasting in Dublin using modern, safe abrasive media — not hazardous silica sand — delivered to your location with our own self-contained equipment. We strip paint, rust, and coatings from concrete, steel, and masonry, leaving a clean, profiled surface ready for recoating or repair. Every job is assessed first so we use the right media and pressure for the substrate, removing the contamination without damaging what’s underneath. With dust control built into how we work, the result is a fast, thorough, low-disruption clean that prepares any surface properly — on your site, around your schedule.

What We Do?

Mobile On-Site Blasting

Our fully mobile blasting rigs come to you, so there’s no need to remove, transport, or dismantle whatever needs cleaning. We blast in situ — floors, structures, plant, and fixed equipment — using self-contained units that carry their own air, media, and recovery. That saves time, transport cost, and downtime on jobs that can’t move. We work indoors and outdoors across Dublin sites of every kind. See full specs on our mobile sand blasting page.

Concrete & Floor Surface Preparation

A coating is only as good as the surface it bonds to, and blasting is one of the most effective ways to prepare concrete. We blast floors and slabs to remove old coatings, laitance, and contamination, leaving the profiled surface that epoxy and resin systems need to grip. This is the essential first step before any quality floor finish. It’s also faster and more thorough than grinding alone on many surfaces. Pair it with our epoxy flooring service for a complete prep-to-finish job.

Steel & Metal Blast Cleaning

Steelwork, frames, machinery, and metal fittings collect rust and failing paint that undermine both strength and appearance. Our blast cleaning strips metal back to a sound, bright surface ready for priming and recoating. Removing corrosion properly is the only way to stop it returning under a new finish. We control the profile so the surface is ideal for the protective coating that follows. The result is metal that’s genuinely clean, not just repainted over rust.

Paint & Coating Removal

Old, flaking, or unwanted paint and coatings have to come off completely before anything new goes on. Blasting removes them quickly and evenly across large or awkward areas where scraping and sanding can’t cope. It reaches into textures and corners that hand tools miss. The surface is left clean and uniform, ready for its next finish. It’s the fastest route from a tired coated surface to a fresh, sound one.

Rust & Corrosion Removal

Rust spreads beneath coatings and weakens metal from the surface in, so removing it fully is critical. Our blast cleaning cuts through corrosion to bright, sound metal, halting the damage and giving protective coatings a clean base. Treating it properly now prevents far costlier repair or replacement later. We match the media and pressure to the metal so we clean without distorting it. It’s corrosion control done at the source.

Graffiti & Masonry Cleaning

Graffiti, grime, and surface staining on brick, stone, and concrete can be stripped back without harsh chemicals using the right blasting media. We clean masonry and facades carefully, removing the contamination while protecting the surface beneath. Gentle media and controlled pressure restore the original finish without etching or damage. It’s an effective way to revive tired or vandalised surfaces. The result is clean masonry that looks renewed, not scoured.

Why Choose Irish Floor Company?

• Safe, modern media — never hazardous silica sand:
  

  “Sandblasting” is the common term, but we use modern abrasive media that avoids the serious silicosis risk of crystalline silica. That protects our team, your staff, and anyone nearby, and keeps the work compliant with current health-and-safety expectations. The right media also cleans more effectively on most substrates. We choose it based on the surface and the result you need. You get a thorough clean without the health hazard of old-style sand.

• The right media and pressure for every surface:
  

  Blast too aggressively and you damage the substrate; too gently and the contamination stays. We assess each surface — concrete, steel, masonry — and match the media type and pressure precisely. That removes paint, rust, or grime cleanly while protecting what’s underneath. Using one setting for everything is how blasting goes wrong. We tune the process to the job. The surface comes out clean and intact, ready for what comes next.

• Genuinely mobile, fully self-contained:
  

  Our rigs carry their own compressed air, media, and recovery, so we work anywhere on your site without relying on your power or facilities. That means fixed plant, large structures, and floors can be cleaned in place, saving the cost and disruption of moving them. We set up, blast, and clear away with minimal impact on your operation. It’s surface preparation that comes to you. The convenience is built into how we work.

• Dust and debris control built in:
  

  Uncontrolled blasting creates mess and risk, so we manage it from the start. We contain and recover dust and spent media, keeping the surrounding area clean and the work safe for everyone nearby. That makes blasting viable even in occupied or sensitive locations. You’re not left with a site covered in debris. The clean-up is part of the service, not an afterthought.

• Prep and finish under one roof:
  

  Because we also coat and finish floors, we don’t just clean a surface and leave — we can carry the job straight through to a fully prepared, recoated finish. That continuity means the blasting is done specifically to suit the coating that follows, with no gap in standards or accountability. You get one team from preparation to finished surface. It’s a seamless route from contaminated to complete. The whole job is handled together.

• One accountable in-house team:
  

  Assessment, blasting, dust control, and any follow-on coating are handled by our own people — no sub-contractor handovers where quality and responsibility slip. You deal with the same team from first quote to final result. That continuity keeps the standard consistent across the whole job. It also gives you one clear point of accountability. You always know exactly who stands behind the work.

Who We Work With?

• Construction and refurbishment contractors
• Manufacturing and engineering facilities
• Warehouses, factories, and industrial units
• Property owners and facilities managers
• Steel fabricators and metalwork businesses
• Local authorities and public-sector sites
• Commercial and retail premises

Mobile Sand Blasting Across Dublin — Book a Free Quote

If you’ve got paint, rust, coatings, or grime to strip back, on-site blasting is the fastest, most thorough way to get a clean, sound surface ready for whatever comes next. Irish Floor Company brings fully mobile, dust-controlled blasting anywhere in Dublin, with an honest assessment and a fixed quote — no guesswork and no pressure. Whether it’s a concrete floor to prepare, steelwork to de-rust, or masonry to clean, we’ll match the right media to the job and clean it properly. Read more about how we work on our homepage, then get in touch to book.

📞 086 2631652 | 📧 info@irishfloorcompany.com | 📍 East Wall Road, Dublin 3

FAQs

Do you actually use sand for mobile sand blasting in Dublin?
No. We use modern, safer abrasive media rather than hazardous silica sand, which carries a serious silicosis risk and is restricted. “Sandblasting” is just the common term — the process we provide is safe, compliant blast cleaning.

Can you blast on-site, or does the item need to be moved?
On-site. Our rigs are fully self-contained, carrying their own air, media, and recovery, so we clean floors, structures, and fixed plant in place — saving you the cost and downtime of moving anything.

What surfaces can mobile blasting clean?
We blast concrete, steel and metalwork, and masonry — removing paint, rust, old coatings, grime, and graffiti. We match the media and pressure to each surface so it’s cleaned thoroughly without damage.

Is blast cleaning good for preparing a floor before coating?
Yes. Blasting is one of the most effective ways to profile concrete and strip old coatings, giving epoxy and resin systems the clean, keyed surface they need to bond — which is why it’s a key part of proper floor preparation.

How do you control dust during blasting?
We contain and recover dust and spent media as part of the process, keeping the surrounding area clean and the work safe. That makes blasting viable even in occupied or sensitive Dublin locations.